Cookie Img
Send Inquiry    Call Me Free
Home » Products » Mechanical Seal Rings

Mechanical Seal Rings

Mechanical seal Rings are attached to the mechanical seals that usually require clean and uncontaminated water or some other liquid in order to lubricate seal faces. The faces of the seal are lubricated by using a layer of liquid or gas between them. Based upon the requirements of the system, lubrication is provided either by the pumped liquid or from any other source. Some of the rings are made to be used for the dual mechanical seals and require paddle-type or straight vane configuration. This seal acts a slider bearing or check valve for preventing leakage of liquid from the pump.

Key Points:
  • Air can be easily drawn into the pump with the help of our provided Mechanical Seal Rings
  • Constructed to avoid the deposition of abrasive particles between the faces of seal
  • A variety of rings such as O-ring or the cup one are made using elastomers
  • Engineered to match the kind of pumped material and temperature limit
Cemented Carbide Tools
close
Cemented Carbide Tools
CT 03
  • ISO Code: P20
  • Grade: YT14
  • Density (g/cm3): 11.4-11.5
  • Hardness (HRA): 91-92
  • TRS Mpa: 1600
Silicon Carbide Mechanical Seal Rings
close
Silicon Carbide Mechanical Seal Rings
SCMSR
Grade: YG6  (ISO K20)
Density (g/cm2): 14.9
Hardness (HRA): 91
YG6 K20 Tungsten Carbide Mechanical Seal Ring
close
YG6 K20 Tungsten Carbide Mechanical Seal Ring
ms01
  • Grade: YG8  (ISO K30)
  • Density (g/cm2): 14.8
  • Hardness (HRA): 89.5
YG8 K30 Tungsten Carbide Mechanical Seal Ring
close
YG8 K30 Tungsten Carbide Mechanical Seal Ring
ms02
  • Grade: MG1
  • Density (g/cm2): 5.5
  • Hardness (HRA): 92
YG15 Tungsten Carbide Mechanical Seal Ring
close
YG15 Tungsten Carbide Mechanical Seal Ring
ms03
  • Grade: MG2
  • Density (g/cm2): 9.5
  • Hardness (HRA): 89
MG1 Mechanical Seal Ring
close
MG1 Mechanical Seal Ring
ms04
  • Grade: MG3
  • Density (g/cm2): 12.5
  • Hardness (HRA): 90.5
Cemented Carbide Rotary Stationary Seal Ring
close
Cemented Carbide Rotary Stationary Seal Ring
ms02
Sintered Silicone Carbide Mechanical Seal Ring
close
Sintered Silicone Carbide Mechanical Seal Ring
ms03
Tungsten Carbide Mechanical Seal Ring for pumps /compressor /centrifuges
close
Tungsten Carbide Mechanical Seal Ring for pumps /compressor /centrifuges
ms3
Pump Sealing Ring,Carbide Mechanical Seal Ring,Tungsten Carbide Ring Blank
close
Pump Sealing Ring,Carbide Mechanical Seal Ring,Tungsten Carbide Ring Blank
ms6
High Hardness Pump Mechanical Seal Ring in Tungste
close
High Hardness Pump Mechanical Seal Ring in Tungste
ms8
Tungsten Carbide Seal Ring For Water Pump/Centrifugal Pump/Slurry Pump
close
Tungsten Carbide Seal Ring For Water Pump/Centrifugal Pump/Slurry Pump
ms9


Contact Details
BETTER CARBIDE CO., LIMITED All Rights Reserved.